Tag Archives: htd 5m timing pulley

China 15t timing belt drive pulley gear hdt 5m bore 5 pitch 5mm wide 16mm htd belts and pulleys v belt pulley chemical industry manufacturer

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

pulley

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you're looking for a pulley, it's important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys - a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley's face can be round, rectangular, or even "V" shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley's end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can't figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer's instructions when using a pulley.

China 15t timing belt drive pulley gear hdt 5m bore 5 pitch 5mm wide 16mm htd belts and pulleys v belt pulley chemical industry manufacturer China 15t timing belt drive pulley gear hdt 5m bore 5 pitch 5mm wide 16mm htd belts and pulleys v belt pulley chemical industry manufacturer
editor by Cx 2023-06-21

China Htd 3m 5m 8m Gt2 Gt3 5gt At3 At5 T5 T10 Timing Toothed Pulley and Belt Good Quality Aluminium Steel Transmission Belt Custom supplier

Relevant Industries: Machinery Restore Shops, Printing Outlets
Custom-made help: OEM, ODM, OBM
Normal or Nonstandard: Nonstandard
Kind: TIMING BELT
Materials: Rubber, Rubber
Identify: timing belt sleeve for equipment
Specification: Personalized
MOQ: 1 sleee
Feature: Substantial High quality
OEM: Yes
Colour: Environmentally friendly,Black,brown,crimson
Other identify: Transmission belt
Use: Stone, ceramic,glass,electronics,aluminum,tobacco, textile,and many others.
Coating: 3mm 6mm 8mm
Packaging Particulars: Typical packing
Port: HangZhou

very good good quality aluminium metal htd 3m 5m 8m gt2 gt3 5gt at3 at5 t5 t10 timing toothed pulley and belt

Colour : White,black,Red and so on 1mm- 10mm and so forth
Size -20°C +80°C MXL,XL,L,H,XH,XXH,T2.5,T5,T10,T20,AT5,AT10,AT20,HTD2M- 20M,STPD/STS2M-14M,RPP/HPPD2M-14M As for each the calls for of consumers240*20*1mm
Material:PU Rubber, Metal reinforced, Fabric, Kevlar twine.
Mechanical houses:Dimensional steadiness Strong reduced Lower sounds Higher put on resistance No need to preserve Substantial elastic
Working temperature:+30°C to +80°C, Instant high temperature: +110°C
Doing work Stress: ≤32Mpa Bud -Form Ring≤50Mpa
Functionality: Getting older proof, waterproof, prevent UVA, Ozone-resistant, highly resistant to oil, acid and alkali corrosion resistance
Processing:grooving /punch/ slot / pattern / block / CZPT bar / profile
Use (for equipment): Stone, ceramic,glass,electronics,aluminum,tobacco, textile, logistics,printing,packaging,paper products processing industriesetc.
Packing & Shipping and delivery Packing: Typical packingDelivery term: In 3-7days after payment received. Depends on the orders amount.
Certifications Our Business HangZhou CZPT Transmission Belt Co. , Ltd. was founded in 2014, is a concentrate on the adhesive belt analysis and improvement makers. CZPT company has ten thousand sq. meters of creation foundation, the introduction of domestic and foreign superior manufacturing tools far more than 50 models and so on. Mildew far more than 2000 sets, yearly output of different sorts of adhesive belt 500,000. The primary products for the adhesive belt collection of merchandise, this kind of as: glue timing belt, rubber flat belt, Ribbed belt, seamless flat belt and so on.Items are extensively employed in printing carton packaging products, pipe wire and cable traction gear, foodstuff packaging movie products, wood chopsticks carpentry equipment and so on.The firm owns 2 makes," Yonghang, "YONGHANG"Yonghang company strictly employ IS09001 global high quality certification, from design and style, raw resources, to production, each depth is excellence, only for higher quality!
Our Support 1.OEM Manufacturing welcome: Item, Package… 2. Sample buy .3. We will reply you for your inquiry in 24 hrs.4. soon after sending, we will monitor the merchandise for you after every 2 times, until finally you get the merchandise. When you got the merchandise, examination them, and give me a comments.If you have any queries about the difficulty, make contact with with us, we will offer the resolve way for you.
FAQ Q1. Can I have a sample buy for pu Timing Belt?A: Indeed, we welcome sample purchase to check and verify top quality. Combined samples are suitable.Q2. What about the direct time?A:Sample needs 3-5 days, mass manufacturing time demands 1-2 months for get amount.Q3. Do you have any MOQ restrict for buy?A: Low MOQ, 1-10 pcs for sample examining is available.Q4. How do you ship the items and how prolonged does it just take to arrive?A: We generally ship by DHL, UPS, FedEx or TNT. It typically will take 3-5 days to get there. Airline and sea transport also optional.Q5: What are the payment terms?Western Union, Paypal, Ali Safe Shell out or T/T (organization account and personalized account) Q6.What are your firm significant merchandise?Our principal items are Sausage Timing Belt ,film pull belt ,rubber belt, transmission belt,triangle V belt and so on.Q7.What about the value?We consider our ideal to give the competitive cost with the large high quality.

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.
pulley

composite pulley

A composite pulley is a mechanical system where two or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of two pulleys, one fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these three types of pulleys are compared. It's easy to see which one is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of two fixed pulleys and one movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not "fixed".
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-one mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than one and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.
pulley

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you're not sure whether a task requires a pulley, a zipline might be a good option. Connect the two ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are two types of live pulleys: simple pulleys with just one wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on one side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on one side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the two parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.
pulley

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.

China Htd 3m 5m 8m Gt2 Gt3 5gt At3 At5 T5 T10 Timing Toothed Pulley and Belt Good Quality Aluminium Steel Transmission Belt Custom supplier China Htd 3m 5m 8m Gt2 Gt3 5gt At3 At5 T5 T10 Timing Toothed Pulley and Belt Good Quality Aluminium Steel Transmission Belt Custom supplier
editor by czh

China Professional 12 15 16 17 18 20 22 24 25 26 28 30 32 34 35 36 38 40 teeth HTD 5M BF Toothed Timing Belt Pulleys for 15mm 20mm 25mm wide belt pulley bearing

Warranty: 3 years
Applicable Industries: Manufacturing Plant
Customized support: OEM, ODM
Type: TIMING
Material: ALLOY
Product name: Timing Belt Pulleys
Width: for 15mm 20mm 25mm wide belt
MOQ: 1 Piece
Use: Widely Used
Surface treatment: Anodize
Teeth type: HTD 5M
Certification: Reach
Packaging Details: Carton or wooden case
Port: HangZhou or any other ports

Specification

product name 38 40 teeth HTD 5M BF Toothed Timing Belt Pulleys for 15mm 20mm 25mm wide belt
modelHTD 5M
MOQ1 piece
Packing & Delivery To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided. Company Profile ZheJiang ZOXA International Trade Co., Ltd. has been engaged in engaged in the research, development, Rims manufacturers agricultural machinery parts tractor rims w12-28 for 13.6-28 tractor tires sale and service of linear guides,ball screws and bearings for more than 10 years. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. We have large stock,so we can offer the linear guides,ball screws and bearings with short production period and competitive price. Facing the future, we will persist in implementing the scientific concept of development, adhering to "quality first, customer satisfaction, Precision 5 Axis Custom Motorcycle Machine Aluminum Steel Brass CNC Service turning milling CNC machining parts and to be the best" policy, and taking every opportunity to speed up the development.We welcome new and old customers contact us for future business relationships and mutual success! FAQ 1.What's your advantage?A: CZPT business with competitive price and professional service on export process.2. How I believe you?A : We consider CZPT as the life of our company, Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.3.Can you give warranty of your products?A: Yes, CE approved farm tractor reversible plow we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.4.Where are you? Can I visit you?A: Sure,welcome to you visit our factory at any time.

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It's very useful and can be a great addition to your child's science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company's website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn't add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.

China Professional 12 15 16 17 18 20 22 24 25 26 28 30 32 34 35 36 38 40 teeth HTD 5M BF Toothed Timing Belt Pulleys for 15mm 20mm 25mm wide belt pulley bearing